During deck or wood maintenance it is important to prep the wood correctly so the new stain you apply can perform as expected. Any old failing stain that may be left on the wood may end up causing the new stain to peel, flake, and fail prematurely. There is no need to hinder the performance of a new deck stain by leaving remnants of old stain on the wood surface. This is easily remedied by using a deck stain stripper during the cleaning and prepping process. Today there is a product that is user-friendly that homeowners can use to get professional like results when it comes to prepping a deck.

If an old failing stain is present the use of a stain stripper will help to emulsify the stain so it can be washed away using a pressure washer or stiff brush. The first and only powdered concentrated deck stain stripper, designed to be injected through a pressure washer is Restore-A-Deck Stripper. Reviews have indicated that this product can also be applied in higher concentrations if necessary by the means of a pump up sprayer.

Restore A Deck Kits Review

In the past, cleaning and prepping a wood surface was difficult. With any research, you may have found information about cleaners, strippers, brighteners, and neutralizers. This can be confusing for anybody but it is also necessary for getting good results. After all, the number one reason a new deck stain fails prematurely is because the wood was not prepped correctly if at all. No deck stain no matter how expensive it is will hold up and perform as expected if it is applied to a wood surface that was not prepared properly.

Today Restore A Deck Kits are available to homeowners. These kits contain the necessary two-step process cleaner and brightener making deck prepping a breeze. The RAD Kits come with the step one wood cleaner. This is can be used with a pressure washer to remove contaminants like dirt, grime, and wood graying as well as some failing deck stains. This will provide a clean surface of bare wood for the new deck stain to penetrate or adhere to.

Restore-A-Deck Cleaner Powder Advantages

It is no secret that the elements can play havoc on a wooden deck. When a deck is neglected it can become an eyesore in a relatively short time. Water damage causes cracks and splits boards while harsh UV rays turn the wood fibers gray making the whole deck very unsightly.

To protect a wood deck from Mother Nature regular maintenance is necessary. Cleaning and refinishing a deck every couple of years is adequate maintenance to ward off sun and water damage.

Prior to staining or sealing a deck it must be cleaned. A safe and effective method is to use the Restore-A-Deck Step 1 Cleaner to remove dirt, grime, and gray fibers. Deck cleaner powders are common and effective for loosening up these contaminants so they can be washed off the wood. There are some advantages of using deck cleaner powders as opposed to the liquid form deck cleaners.

Ability to Adjust the Strength

With powdered deck cleaners you can adjust the strength needed to do the job. Most powder deck cleaners will have mixing instructions for blending a mild or a more aggressive (hot) mix depending on the type of deck stain you are attempting to remove.

Safer and Easier to Store

Though care should still be taken while storing deck cleaner powders they are safer to keep around than the concentrated liquid forms that can leak or spill easily. Always follow the storage suggestions on the label. The smaller container of a powdered deck cleaner also saves storage room.

Cheaper to Ship

A huge advantage of using the deck cleaner powders is that they are cheaper to ship. A small bucket of deck cleaner powder may make up to 5 or 6 gallons worth of cleaner depending on how strong you mix it. Compared to a heavy 5-gallon bucket of liquid deck cleaner these are a much more economical choice.

Liquid deck cleaners certainly have their place but as you can see there are some big advantages to using deck cleaner powders when it comes to deck maintenance.