Restore-A-Deck Wood Stain Samples
Restore-A-Deck Wood Stain Samples
Restore-A-Deck Wood Stain Natural color
Restore-A-Deck Wood Stain cedar color
Restore-A-Deck Wood Stain light walnut color
Restore-A-Deck Wood Stain dark walnut color
Restore-A-Deck Wood Stain Samples

Restore-A-Deck Semi-Transparent Wood Stain Samples

1 Rating
$15.00
free shipping with ground services
This sample kit includes all Semi-Transparent 4 colors. Natural, Cedar, Light Walnut, and Dark Walnut. 1-2 oz samples per color.

Cottage Gray Color can be added for $3 in Stain Color options.

Note: Restore-A-Deck Semi-Transparent Wood Stain can be applied to dry or damp wood.
Stain Color
 Back to: Restore A Deck Wood Stain

Restore-A-Deck Semi-Transparent Stain Sample Kit

Test the RAD Semi-Transparent colors before purchase!

Includes all 4 Semi-Transparent Restore-A-Deck Colors. Each sample is roughly 1-2 oz. This is enough to test a small area.

New Cottage Gray Color can be added for $3.Restore A Deck Semi-Transparent Stain Color Chart

WHERE TO USE
Restore-A-Deck Semi-Transparent Wood Stain is intended for all wood types of weathered, exterior wood surfaces including decks, fences, siding, outdoor furniture, gazebos, and playsets. You can apply Restore-A-Deck Semi-Transparent Premium Wood Stain to hardwoods including mahogany, ipe, or other types of exotic hardwoods. 

Restore-A-Deck Semi-Transparent Wood stain can be applied the same day as the prep. Make sure that all standing water has dried off the surface after prep. Typically 2-4 hours at 70º F and less than 50% humidity.

Note: Restore-A-Deck Semi-Transparent Wood Stain can be applied to dry or damp wood. 

New Wood Note: New wood is not the same as "damp" wood and needs to weather and be prepped before staining. Restore-A-Deck Stain and New Wood

Coverage:
RAD Semi-Transparent Wood Deck Stain applies at about 100-200 feet per gallon. Actual coverage varies depending on wood porosity.

Restore A Deck Stain Application Tips

ADVANTAGES

  • Stain the same day as the prep!
  • Utilizing the latest advancements in water-based stain technology
  • Cost effective stain and sealer for your wood
  • Deep penetration into the wood grain resulting in less chance of wear and tear
  • Protects wood from damaging UV oxidation and graying
  • Available in 4 beautiful semi-transparent finishes – Natural, Cedar, Light Walnut, & Dark Walnut
  • For use on all exterior wood types and surfaces, not just decks
  • Eco-Safe
  • Dries to a flat, natural-looking finish
  • Water-based, easy cleanup
  • Easy to reapply as needed
  • Easy to remove if needed
  • Does not promote mold/mildew growth
  • Low VOC content, compliant with all US states and Canada

Reviews

Please log in to write a review. Log in

Related
Restore-A-Deck Wood Stain 1 GallonRestore-A-Deck Wood Stain 1 Gallon

Restore-A-Deck Wood Stain 5 GallonsRestore-A-Deck Wood Stain 5 Gallons

Restore A Deck in A Day Stain Brush

Restore A Deck Stain Stripper and Brightener KitRAD300_4cd1cb8e080ad.jpg

Restore A Deck Cleaner and Brightener KitRAD300_4cd1cb8e080ad.jpg

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Carolyn H · 07/12/2018
    We have a 2 year old cedar deck that had an oil based Cabot stain. As it was covered in mildew, we striped, cleaned, and brightened. It is down to bare wood. Is there anything else to do before using a RAD stain?
    • We will reply to your comment shortly
      RAD Products · 07/12/2018
      As long as the wood is clean and free of the old Cabot, dirt, and mildew, you should be good to go!
  • We will reply to your comment shortly
    Laurie · 07/10/2018
    Is it best to test samples after new wood has aged a few months or will sampling new (in my case pine I think) still give a good enough idea of how it will look? Also if my deck was just installed (July 10) in Chicago on a covered porch, is it better to stain after three months in October or wait til next summer? Thank you!
    • We will reply to your comment shortly
      RAD Products · 07/11/2018
      Weather until Spring. Do the sample test after the weathering. Sand off those ink spots now.
  • We will reply to your comment shortly
    Gail · 07/04/2018
    What is the shelf-life for unused stain? Can it last until needed to reapply next year? Also, what's the best method for mixing you stain?
    • We will reply to your comment shortly
      RAD Products · 07/05/2018
      Just shake it to stir. If you store the stain in a temperature controlled room and unopened, it can last a few years.
  • We will reply to your comment shortly
    Gail Steiger · 07/04/2018
    Is it OK to use Gemini Product Cleaner/Brightner which we already purchased from TWP before using RAD stain?
    Thanks!
    • We will reply to your comment shortly
      RAD Products · 07/05/2018
      If you do not currently have a coating on the wood then yes.
  • We will reply to your comment shortly
    Jim · 06/23/2018
    I have a 2 year old Benjamin Moore Arborcoat transparent teak stained deck that is peeling. What do I need to do for prepping to restain?
    • We will reply to your comment shortly
      RAD Products · 06/23/2018
      The BM Arborcoat cannot be stripped. It will have to be sanded off for the prep.
  • We will reply to your comment shortly
    msnunley · 05/31/2018
    I've always heard oil based is a better and longer lasting stain than water based. Is that not really accurate? Are all your stains water based? Will your darker colors last longer than the lighter colors?
    • We will reply to your comment shortly
      RAD Products · 06/01/2018
      Water-based stains have come a long way in the past few years. Better penetration into the wood than before will equal less chance of wearing and peeling. The RAD stains will also be much better at mildew than an oil-based stain. UV protection will be slightly better as well but that depends on the opacity. The RAD stains are water-based. Darker colors will have a slight advantage with UV fading than a lighter color.
  • We will reply to your comment shortly
    james harris · 05/30/2018
    Does the natural need to be reapplied yearly?
    • We will reply to your comment shortly
      james harris · 06/01/2018
      I think the dark walnut makes the most since, but the samples were placed on non weathered wood to get an idea before placing it on my deck. The colors didn’t sink in fully to see how the color would look with my design. What do you think? The others tended to be yellowish to orange.
      • We will reply to your comment shortly
        RAD Products · 06/02/2018
        The Dark Walnut would look very nice here.
    • We will reply to your comment shortly
      RAD Products · 05/30/2018
      The Natural is tinted, not clear, so it does have UV protection. Should last about 2 years.
  • We will reply to your comment shortly
    Greg Eardley · 05/21/2018
    Do you have any pictures of the dark walnut on a deck? Thank you.
    • We will reply to your comment shortly
      RAD Products · 05/21/2018
      We prefer to offer the test samples as every deck will turn out a different color based on wood type and age but here is one.
  • We will reply to your comment shortly
    Dennis · 05/10/2018
    Can I buy a sample of just one color instead of all 4? I need to know if the natural color is truly natural or if it darkens the wood after application.
    • We will reply to your comment shortly
      RAD Products · 05/10/2018
      Natural is tinted and darkens the wood similar to as if wet with water. We do not sell samples individually.
  • We will reply to your comment shortly
    Rick L Hoffman · 05/09/2018
    Is the restore a deck stain good for IPE Deck surfaces?
    • We will reply to your comment shortly
      RAD Products · 05/10/2018
      Yes, it can be used for IPE. just one coat.
  • We will reply to your comment shortly
    jan granse · 04/28/2018
    My cedar deck has just been cleaned and brightened. Can your clear stain be applied as is without redoing the prep with your products?
    • We will reply to your comment shortly
      RAD Products · 04/28/2018
      Post a picture please to make sure it is prepped well. Thanks
  • We will reply to your comment shortly
    Denise Shesler · 04/14/2018
    Which stain would be best for a redwood deck? The deck is approx 4 years old and was sealed with a clear stain when new. I plan on using the cleaner and brighter, but am unsure which semi transparent stain to use.
    • We will reply to your comment shortly
      RAD Products · 04/15/2018
      The Restore A Deck Wood Stain would work well. FYI, you have to strip and brighten for prep. A cleaner will not remove the clear stain that you have and that will have to come off prior to applying a new coating of deck stain.
  • We will reply to your comment shortly
    Bill Puckett · 04/11/2018
    Will your work on 1st generation trex grey decking no grain deck is 25 years old
    • We will reply to your comment shortly
      RAD Products · 04/11/2018
      Sorry but this product will not work on Trex.