Restore A Deck Stain Stripper Instructions and How To Help

Maintaining a woodRAD STRIPPERdefault deck will ensure you get the longest lifespan and most use out of the extra outdoor living space. To maintain the appearance of a deck it should be cleaned and recoated every couple of years on average.

When preparing a deck for refinishing it is vital that it be cleaned properly. It is important to remove any old stain or sealer remnants that may be on the deck that would block the new stain or sealer from penetrating the wood properly.

Restore A Deck Stain Stripper is a specially designed two-part system for stripping old transparent and semi-transparent deck stains from wood prior to refinishing. There are some basic step-by-step instructions for stripping a deck with the RAD Stain Stripper system.

Restore A Deck Stripper Steps

1. Be sure air temperatures are within 45-90 degrees before starting.

2. Remove all furniture and décor from the deck and the surrounding area. Move at least 20 feet away and downwind from overspray.

3. Although RAD products are Eco-Friendly it is still recommended to cover any sensitive landscaping, shrubbery, and/or plants or pre-wet with water. Make sure to rinse well any overspray that may get on plants.

4. Cover any windows, doors, and other areas of the house with plastic or pre-wet with water.

5. Be sure to wear personal protection equipment such as eyewear, gloves, and clothing.

6. Mix Restore-A-Deck Stain Stripper by following the suggested instructions. Mix until all the crystals are fully dissolved. If using a pump sprayer to apply, mix in a separate bucket first and transfer to sprayer to avoid clogging of sprayer inlet tube.

7. Option 1: Mist fresh water onto the deck then apply RAD Stain Stripper using a pump sprayer or scrub brush. This is the most effective way.

   Option 2: Use your chemical injector to apply RAD Stain Stripper for medium to light stain removal.

8. Allow RAD Stain Stripper to sit on wood for 10-15 minutes or until the surface becomes slippery. Keep misting deck with water so is not allowed to dry.

9. Gently pressure wash at 1500 PSI or hand scrub vigorously the deck until all dirt, grime, and gray fibers are removed. Rinse deck, shrubbery, and surrounding area with fresh water. Pressure washing is more effective.

10. Reapply RAD Stain Stripper to any stubborn areas repeating steps 7 & 8 to remove old stain or sealer as much as possible.

11. While wood is still wet apply Restore-A-Deck Wood Brightener following the mixing instructions and using a pump sprayer. The RAD Wood Brightener does not need to be washed or scrubbed, simply rinse off after 10 minutes of dwell time. Make sure to rinse the RAD Brightener thoroughly for 20 minutes until all soap suds are removed after the 10 minutes dwell time.

Note that RAD Stain Stripper is not intended for use to effectively remove solid deck stains or paints.

Need Help Stripping an Old Stain? Ask Below!

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Camille Willman · 03/12/2014
    Does the stripper help with mold/mildew, or do I need the cleaner also?