Question: What type of wood is Restore-A-Deck used on?
Answer: Restore-A-Deck is safe for all wood types including pressure-treated pine, cedar, redwood, ipe, and mahogany.

Question: What is in Restore-A-Deck?
Answer: The majority ingredient in the cleaning formula is sodium percarbonate.  This is the one recommended by the Western Red Cedar Lumber Association. There is also a blend of proprietary detergents that makes the cleaner work faster and more powerfully than just straight sodium percarbonate cleaners. The Restore-A-Deck brightener is a blend of mild acids that is much less harsh on your wood than the straight oxalic acid. These formulas are the exact formulas we use professionally to clean and maintain decks every day. There is nothing comparable on the homeowner market.

Question: Is your product just for wood that has already been sealed? My deck was just built.
Answer: Restore-A-Deck can be used for maintenance cleaning, mild stripping, or to prepare new wood for sealer. For general cleaning, you would not allow the product to sit (dwell) for a long time before rinsing. For a more aggressive action, you would let the product dwell for a longer period.

Question: How does the cost of your product compare to what I can get at my home center?

Answer: Here is the best part, it's not only of much higher quality and more effective but in terms of time invested and harshness it's cheaper. By focusing on product development, we are able to offer a product that works effectively and does not cause the long term damage of bleach and soap cleaners. We are not shy in saying our product is the best out there for the money. Our smallest kit makes 5 gallons of cleaner and another 5 gallons of brightener. Your cost is about 5 cents per square foot.

Question: Is your product safe for the environment? I don't like the idea of chemicals on my deck or in my soil.
Answer: Restore-A-Deck is less abrasive to the wood than most of the products on the consumer market. Its primary ingredient is also found in OxyClean™. There are other proprietary chemicals in the formula, but all of them, once diluted with rinsing, meet all E.P.A standards for disposal and will safely drain into the soil without affecting the soil pH balance. As with the use of any type of detergent, please read the safety precautions page.

Question: Can't I just use bleach and dish liquid on my deck?
Answer: We do not recommend you use bleach (sodium hypochlorite) on your deck. Bleach attacks the lignin in wood. Lignin is the glue that binds wood fibers together. Without enough lignin in place, wood begins to break down more quickly. In addition, bleach imparts an unnatural whitening to the wood. This shows up very prominently when you apply a pigmented sealer as blotchiness. Every lumber association recommends against the using of bleach yet 90% of cleaning products available at your local home center contain bleach.



Question: Why use any chemicals at all? Isn't using a pressure washer by itself good enough to do the job?
Answer: In order for a pressure washer to adequately clean wood, you would need to use extreme pressure at the surface. This causes the wood to split and the grain to raise, both causing the surface to become unpleasant to walk upon. Using a proper detergent like Restore-A-Deck eliminates the need for highly pressurized water hitting the deck. You wouldn't take a shower without using soap or shampoo, nor would you wash your dishes with just water. The detergent does the cleaning, the water acts as the rinse.

Question: Do I need to use a pressure washer if I'm using Retore-A-Deck?
Answer: While initially, we wanted a product that would not need the added scrubbing action of a pressure washer, we feel it is safer to recommend one be used but with proper technique. In many cases, Restore-A-Deck will work it's magic and can be rinsed using some brushing and garden hose pressure. We have included a more detailed explanation page on proper pressure washer usage here.

Question: What is included in the kit. What additional tools do I need?
Answer: Your kit will include a container of the cleaning agent, a container of the brightening agent and detailed instructions. You will also need at least one pump up 3-gallon sprayer (we recommend two), safety goggles, and PVC gloves. Optional equipment may include a pressure washer and moisture meter.

Question: I used Restore-A-Deck and it looks great! Now I want to seal in the beauty and protect it from the elements. What do you recommend?
Answer: Allow the wood to dry for three to four days in direct sunlight (75+degrees F) Pick a quality sealer from a reputable dealer. We suggest the Woodrich Timber Oil, Hardwood Wiping Stain or Amstrong Clark.

Question: I have leftover materials from your kit, should I throw them away?
No way. Restore-A-Deck's cleaner is excellent for cleaning vinyl patio furniture, garage floors, house washing, you name it. The only time we recommend caution is around colorfast material. The brightener in your kit is also excellent for removing rust stains from concrete. Restore-A-Deck's materials have a shelf life of one year if kept sealed and dry.

Question: I applied a sealer and I hate the color. Will your product remove this finish?
Answer: That depends on a couple of factors. Will you be applying a sealer that is similar or darker in color? Also, how long has the sealer been exposed to the elements? Restore-A-Deck is an outstanding cleaner and a light duty stripper but it has its limitations. If the finish has been down for less than six months or if you are looking to change to a dramatically lighter colored finish you will need a heavy duty stripper made with sodium hydroxide. We have these available for contractors only as they are dangerous and caustic products.

Restore-A-Deck will not remove paint or solid stain.
Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Scott · 05/02/2018
    Hi. I have a 22 year old deck - pictures attached. I plan to use stripper and the brightener, followed by a new stain. Does this sound right? Also, i would like to also re-stain the flat/top part of the deck railing. Can I prep with stripper and brightener also? Thank you for your help.
    • We will reply to your comment shortly
      RAD Products · 05/02/2018
      Please upload the photos. Need to be less than 1mb per photo.
  • We will reply to your comment shortly
    Kit · 11/16/2017
    If I use the RAD and then it rains, do I have to do anything special except sweep it?
    • We will reply to your comment shortly
      RAD Products · 11/16/2017
      Sweep or blow off any dirt, leaves, etc prior to staining.
  • We will reply to your comment shortly
    Ella · 11/03/2017
    I purchased the RAD Kit. I used the stripper to remove old deck paint but due to weather and other issues with my schedule I was not able to immediately follow the stripper with the brightener. Will it cause problems if I use the brightener a few weeks after the stripper? And can I use the brightener now without cleaning my deck again?
    • We will reply to your comment shortly
      RAD Products · 11/04/2017
      You should lightly pressure rinse the deck after a few weeks and then brighten the wood. It is not the ideal way but the brightener should still be used.
  • We will reply to your comment shortly
    Alec · 10/13/2017
    I just used RAD stripper to remove Cabot clear from a cedar deck. I went over it two times and still thought I hadn't gotten it all off. I thought this because no matter how much I scrubbed and rinsed, it remained kind of slimy, and i could still get some brown residue to come up after scrubbing. However, now the deck is dry and looks totally stripped. Was that sliminess coming from residual product that still needs removed? Or was that just some of the wood surface becoming slimy and by scrubbing hard I was actually removing wood particles? Thanks for any help!
    • We will reply to your comment shortly
      RAD Products · 10/14/2017
      It was wood pulp. Did you brighten the deck after the stripping?