Restore-A-Deck Package 600

$88.99
free shipping with ground services

Our most popular kit provides enough product to clean and then brighten a 30x20 deck with rails and 5 steps (1200-1600 total sq.feet). Two Step 1 Cleaners / Two Step 2 Brighteners

 Back to: Restore-A-Deck Prepping Products

Our most popular kit provides enough product to clean and then brighten a 30x20 deck with rails and 5 steps (1200-1600 total sq.feet). For a fence this package will clean and then brighten both sides of 90 feet of fence.

You will receive 2 containers of RAD Step 1 Wood Cleaner and 2 containers of RAD Step 2 Wood Brightener.

Leftover product can be used to clean concrete, house siding, lawn furniture and awnings. (Do not use over grass, clean furniture on a hard surface)

A certified wood contractor would charge about $350 to perform this service for you. Similar products like Cabot's Problem Solver stripper and brightener would cost $150.

Restore-a-Deck Step 1 is a wood cleaner and preps stains for reapplication of a stain. It is not a stain stripper or remover of old stains. Please see Restore-A-Deck Stripper if you are trying to remove a semi-transaprent stain.

Reviews

Thursday, 19 October 2017

This kit contains 2 Step 1 Cleaner and 2 Step 2 Wood Brighteners. Preps 1200-1600 sq feet.

RAD Products

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Lynn · 04/05/2021
    Hello!  Would Restore-A-Deck cleaner and brightener be safe to use on a mahogany deck?  The deck has been previously coated with an oil based product.  I plan on using another oil based product after cleaning.  It has been about 7 years since last done and is very dirty.
    • We will reply to your comment shortly
      RAD Products · 04/05/2021
      Yes, but you should strip and brighten since you have an old coating.
  • We will reply to your comment shortly
    Douwe douwes · 11/26/2020
    Hi, I stripped, brightened and twice stained (semi transparent) my hardwood pool deck back in april 20. It's now showing serious barren spots. Is that normal? Furthermore: how to go about a new coat/ coats? Cleaning, brightening and staining? Or just cleaning and staining? Thanks. (Living in the caribbean, by the way)
    • We will reply to your comment shortly
      RAD Products · 11/27/2020
      Exotic hardwoods can only have one coat of stain and they also need to be cleaned and recoated annually. Sound like you may have over-applied. Prep to remove and then just one coat.
      https://www.restore-a-deck.com/restore-a-deck-wood-stain-on-exotic-hardwoods-ipe.html
      • We will reply to your comment shortly
        Douwe douwes · 11/27/2020
        Thanks for the feedback. Does this mean i have to strip and stain (once)? Or will cleaning and staining (once) suffice? In both cases: is brightening necessary or advisable?
        • We will reply to your comment shortly
          RAD Products · 11/28/2020
          Strip and brighten this time. Apply one coat. In the future, you can clean and brighten for prep.
          • We will reply to your comment shortly
            Douwe Douwes · 01/03/2021
            I stripped, brightened, rinsed and applied one coat on a damp deck. It turned out very spotty - see photos. Any idea what went wrong and what do you recommend me to do?
            • We will reply to your comment shortly
              RAD Products · 01/04/2021
              You did not rinse the Brightener completely out of the wood and it reacted with the stain. Here is a good article on why this can happen: https://www.deckstainhelp.com/why-rinse-a-wood-brightener-with-water/

              Try applying one light coat to one board after the deck dries for a day or two. See if it evens out. If so, apply one light coat to all.
  • We will reply to your comment shortly
    Simon · 05/18/2020
    I have a 2 year old pressure treated deck would the cleaner and brightner help to restore the natural color and grain
  • We will reply to your comment shortly
    Skip · 06/10/2019
    Also, what do I do if it rains before my RAD stain is dry? I live in the Northwest and weather can be unpredictable.
    • We will reply to your comment shortly
      RAD Products · 06/10/2019
      It cannot rain on the RAD stain if it has not dried. It will ruin the finish. No rain for at least 4 hours after applying.
  • We will reply to your comment shortly
    Skip · 06/10/2019
    Once mixed with water, what are the shelf lives of the cleaner and brightener products? Want to test, and then use a few months or so later.
    • We will reply to your comment shortly
      RAD Products · 06/10/2019
      The cleaner has a shelf life of 3-6 hours once mixed. The Brightener does not have a shelf life.
  • We will reply to your comment shortly
    Denise · 06/02/2019
    Can I use the cleaner and brightener products if I have a well?
  • We will reply to your comment shortly
    Vicky · 05/28/2018
    The description states "Leftover product can be used to clean concrete, house siding, lawn furniture and awnings". Is that referring to the cleaner, brightener, or using the 2 step process?
  • We will reply to your comment shortly
    RAD Products · 09/14/2016
    Mike Cosgrove:
    What is the best stain for new cedar in natural color? I live in Southwest MO

    After the wait and prep, try the Armstrong Clark.
  • We will reply to your comment shortly
    RAD Products · 09/14/2016
    Mike Cosgrove:
    Would like to use this for my brandnew cedar deck. IS this the best kit?

    You can use this for new cedar, but new wood needs to weather for about 3 months after install, before prep and staining.
  • We will reply to your comment shortly
    Mike Cosgrove · 09/14/2016
    What is the best stain for new cedar in natural color? I live in Southwest MO
  • We will reply to your comment shortly
    Mike Cosgrove · 09/14/2016
    Would like to use this for my brandnew cedar deck. IS this the best kit?
  • We will reply to your comment shortly
    RAD Products · 07/13/2016
    Mario Bergeron:
    HI....I stained my fence last year with (TWP 1500 Pecan) and i would like to do a second coat this summer. Do i need the wood brightener with the wood cleaner (restore-a-deck package 600 ) or just the wood cleaner?

    Just the cleaner is okay but you can do the brightener.
  • We will reply to your comment shortly
    Mario Bergeron · 07/13/2016
    HI....I stained my fence last year with (TWP 1500 Pecan) and i would like to do a second coat this summer. Do i need the wood brightener with the wood cleaner (restore-a-deck package 600 ) or just the wood cleaner?